Peugeot 206 Problems

I need to replace both the ECU and BSI units on my pug 206. Have removed the ECU, but require assistance to remove the BSI. How do I access it?

ok hi there and hope you can help so this is the problem. its a 206 1400 great car really but the other week i was driveing it and it started to run lumpy as if it was missing from one cylinder and engine management light came on. turned it...

alright does any1 no how to stop the airbag light flashing. it was on when i bought the car but after replacing the wing it went off for quite awhile but now it has come back but its flashing this time, even when i turn the passenger airbag...

my rear wiper does not stop even when lever is at off position, i currently have the motor unplugged at the rear but as soon as i plug it in the wiper starts. I'm not sure whether i need a new motor or would it be a wiring problem

Is there a way to check the master cylinder to check if it is defintely faulty before changing it?

can anybody help me by telling me what these codes mean u 1003 u 1118 u 1000 p1042 for my peugeot 206 sw

I have a 1999 Peugeot 206 with a sunroof that doesn't close all the way. If I hold the close button after the roof has closed it makes a continual clicking noise, but never closes that last bit. Sometimes it fails to open completely ...

I had been driving for about 40-50 mins and they brakes were working fine at first, but then when i pressed the pedal it just went to the floor. The brakes were still working, but not as good. The front pads and discs are fine, the fluid l...

starts, ticks over fine, accelerates well, cuts out and kangeroos on trailing throttle in slow traffic can accelerate out of the the problem and runs perfectly at 40+ mph

How can i tell if the engine in my car is engine number TU3 or KFW? Would it say on the engine block somehwere, if so any ideas where to?

I need to replace the sump on my 206. Is it a difficult job to do?

dear sir, i need to know where the iat sensor is and what it looks like. many thanks.