Peugeot Partner Problems

this question is in parts. my cluch went last week, since then the engine is running badly, i did a compression test which came back as 1= 27 bar.2=22bar.3=19bar. 4=23bars. does that indicate poor compression. before all this she was runn...

should the fast idle lever be free for me to move. i have a lucas fuel injection pump, and i noticed that the manual stiop lever was stiff, so i freed it. the fast idle lever is also stiff, i cant move it. so before i make any attempt i nee...

i had the clutch go, when i got the van back after with a new clutch the van lacked power. i dont understand why the power would drop after a new clutch is fitted, the van used to idle at 900rpm and now it idles at 500rpm, i have fitted a n...

The throttle cable has snapped at the pedal, both the cabel and the plastic joiner has snapped. I am a Fire-fighter and need my van to get to work. Can anybody help to describe how to replace cable, thanks Pete

i have a peugeot expert 2lhdi which wont start after doing a leakback test it shows me that no1 injector is not injecting as this one has already been checked by a diesel engineer i checked the wiring harness to the injectors which seems t...

failed to start after being switched off when hot have now waited 2hours will still not start fuel is getting to injectors

have any other peugeot partner owners experienced this problem

I folded my rear seat down and now it is stuck, I believe it is because of the seat belt. Can anyone advise me on how to unstick it?

when driving in fifth gear ,when i decelerate and accelerate again it jumps out of gear

hi can anyone help me i have a key fob for my van that operates the central locking and the unlock button has broke off so i bought a new fob and im looking for details on how to reprograme the new fob so that it will operate the central lo...

Having a problem with my speedo on partner van and its doesnt seem to be doing anything on the mileage counter either. anyone help?

used the van 3 days ago in the wet! when I tried to use it today it starts fine but back end is locked up. I wounder if hand break has locked on! any suggestions on freeing it up or what else it could be.