2000 Peugeot 206 engine racing
Year: 2000
Variant: 206
Categories:
Running Rough, Starting & Power Loss
sometimes when driving the engine starts racing away and the revs shoot right up.been took to various garages and the diagnostic machine shows no problem.the problem only happens randomly so when at the garage it never happens.one garage has said it could be the valve and had the car for a week to replace the valve.it was ok for a week now the problem is back,leaving me scratching my head
Posted: Dec 22, 2010 (13 years ago)
You dont say what engine in car .Usual cause is ICV (stepper motor) .
Posted Dec 22, 2010 (13 years ago)
sorry its a 1.4
Posted Dec 22, 2010 (13 years ago)
had the icv cleaned out (allegedly)we know what some garages are like
Posted Dec 22, 2010 (13 years ago)
No problem . Dont know why they took a week for a simple job like that .Was the ICV / stepper motor / throttle body cleaned ? Check for any vacuum pipe leaks also .This is from another Peugeot site on same problem that they had solving fault .
Posted: Thu Oct 14, 2010 6:48 pm Post Subject:
--------------------------------------------------------------------------------
Problem solved.
I spoke directly to the workshop supervisor on Monday who told me they had gone over everything, all sensors we're checked, the inlet manifold and throttle housing we're checked. Bloke said an 'old school' technician with 20 years experience from another dealership was coming to have a look.
Well he found the problem. The purge valve was not closing and was allowing vapour and air in to the engine at idle.
Anyway, good to have it fixed.
Thanks Everyone for the advice.
Posted: Thu Oct 14, 2010 6:48 pm Post Subject:
--------------------------------------------------------------------------------
Problem solved.
I spoke directly to the workshop supervisor on Monday who told me they had gone over everything, all sensors we're checked, the inlet manifold and throttle housing we're checked. Bloke said an 'old school' technician with 20 years experience from another dealership was coming to have a look.
Well he found the problem. The purge valve was not closing and was allowing vapour and air in to the engine at idle.
Anyway, good to have it fixed.
Thanks Everyone for the advice.
Posted Dec 22, 2010 (13 years ago)
This problem is archived
If you're having a similar problem please click below to re-post this problem, you can then customise it to suit your situation.
Join the community
Got a question? Can you answer other questions here? If so please...
More problems with the 2000 model year Peugeot 206
We have 117 problems and solutions in our database for this model year of the car.
View all Peugeot 206 Problems
206 Recalls (15)
Parts mentioned