Mitsubishi L200 Problems & Fixes

Blocks in 3rd gear. When I stop for 10 minutes it clears for a while then does it again.

So my clutch completely gave out without warning at 60 while towing on motorway. I’m arguing clutch cylinder and under warranty…. As my understanding is clutch cylinder controls pressure applied ...

Car became abit sluggish, now doesn’t start atall, cranks over fine but won’t fire up, glow plugs are fine bench tested them also hear the glow plug relay kick in, also using scan tool live data t...

seems if no power to system?

Manual gearbox not changing from 4th down to 3rd but all other gear movements fine. No noise or vibration it’s as if u hit a wall trying to make this one gear change. Could it be a faulty clutch iss...

Low idle runs rough on tickover revs drop close to stall. Revs hold steady just to low. No smoke runs ok at higher revs.

Taking a lot of presses of the button to start engine

Window has always worked fine. Went to lower todsy for something and it won't work. Lock switch is off

I can turn the main beam on but can’t turn it off. I dip through the lights it comes off. Nothing on the dash board then When I turn the engine off the main beam comes on. If I run the engine and op...

Heater takes ages to produce heat in the cab

I have changed glow pugs + glow plugrelay reset the engine management light and its came back on again anyone help me.

Poor acceleration from standing start