Hello :) Engine management light comes on, no flashing, engine is happy and all oils checked.. Attached my ODB11 Scan Tool to the diag port and received error code 001 general electrical fault... Reset fuses and removed battery lead (Black)...
2007 1598 ccCar running when engine cutoff then 5 minute for star
2000 Mazda smI need to know the problem in this scenario
1997 1.3 B3The Car starts and drives fine from cold. When the Car is warmed up if you are either taking off from a junction or going uphill i.e. anytime the Car is under a little pressure there is a noticeable Missfire. I presume it is a Sensor issue ...
2000 1.3 5Dr 125000 MilesHi, my car was making a screeching sound for a while and then it would not start. I managed to get the breakdown gentleman to tighten the belt which stopped the screech (not sure this is a permanent fix as he only did the top one and said I...
2000 1.6opened passenger door with key and alarm started off. cannot stop it. Any ideas?
2003 manual petroltried to start car today, and for the first time ever the car started without fully turning key i.e when lights and radio should come on the car started up but with a very loud straining unusal noise from engine, not wanting to drive it, co...
1998 1.3Hi, My other son's car has sprouted an oil leak from the grearbox area. More of a drip really, but bad enough to want to sort it. I think it's coming from the drain plug, and I have a new washer for that. My problem is, where do I top it u...
1996 323 f Imolahi can anyone help ive just purchased this mazda its been sitting on drive for a week with no battery on , ive put one on now but cant get the alarm or immobilizer off its a lazerline make with 2 buttons any idea if you have to reset it if ...
1996 1.8f executiveTell us about your 323 problem