Ford Fiesta Throttle Body Problems

Hi everyone, Ive got a starting problem with my GF's Fiesta. Sometimes it starts, sometimes it wont. Ive tried jump starting but this had no effect and all the car electrics work perfectly so this makes me think it isnt the ba...

I have a 1.25 fiesta and when you put your foot on the clutch, the revs dip below 500rpm thus causing the engine to stall! If it doesn't stall then the revs are very unstable! On inspection i discovered a split breather hose which i have...

Hi i'm new to this forum. I've got a problem with my 1998 ford fiesta 1.3. When driving along in the car and you go to change into gear. So the clutch is fully down and my foot is totally off the throttle.So the engine is not under any sort...

Hi just wondering if you can help at all? I have a Ford Fiesta zetec 1.4 Petrol 52 reg. I broke down last week as I had a “eac fail” come up flashing on the dash. My breakdown came out and put the computer up and it said throttle body. ...

Had a new clutch fitted 2 mnoths ago and now every now and again my gear bow sticks and wont go into gear at all also the clutch pedal sticks to the floor. My car also cuts out sometimes when turning corns or driving very slow.

My car sometimes cuts out at juctions espeacially when in slow moving traffic, ive been told it could be my tappets but not sure. HELP!! I AM TRAVELING to wales on Saturday and want to make sure it ok!

We have been having trouble with my Wifes 1.4 2002 Fiesta recently and haven't been able to determine what is causing the fault. Occassionaly but often enough, the car won't start when turning the ignition. When it does eventually start the...

change the coil pack and the ecu

I have a 'V' reg fiesta which has begun to over rev when changing down gear, especially from 2nd to 1st when in a stationary position. This was intermittent at first but is now becoming most of the time. It does it very briefly and then i...

i have a 1999 ford fiesta 1.4 zeetec it just stsrted to over rev it goes back to 10,000 reves if i put the brakes on i have to keep on putting the brakes on to get it to idel normaly the breathing pipe on the inlet manifold had collapsed i ...