Peugeot 407 Problems & Fixes

dont no what to do next new alternator and battery lights still come on now particulate filter light comes on saying lev...

reawwwr window opens on its own I close it get behind wheel take off then warning light comes on in dash saying rear win...

the unit stopped working...was difficult to steer.....unit was very hot...although you could touch it so not boiling let...

Very tight steering

The cooling fan doesn't to cool radiator when water is hot, however it works when you switch the aircon on, the other pr...

a clip has broken off the front section of the blind. the electrics work ok and the wire move up and down. I have the bl...

I have a Peugeot 407, 1.6hdi that won't start. It will start when rolled but won't start with the turn of the key. It wa...

The engine revs fluctuate around 200 RPM at various car speeds whilst driving, for example if you are maintaining 30 MPH...

Friend had my car and it lost power and cut out on motorway he got AAout and they said it was starter motor . Does this...

I have found water after i drained the oil to put a new oil

Warning on display says that rear fog light is faulty. However both (in fact all) lights working fine. Any ideas please?

My air con/heating only works on the passenger side (up on dash, side vents and footwell). My drivers side just has rand...

Hi my 407 is going crazy and I find it hard to know what to fix so here's what's wrong . - center lock not working ...

im after a wiring diagram for starter system plz [email protected]

i have a message on lcd display and yellow triangle icon on message is ``risk of particle filter clogging`` tried re...

hi,just got in car and the heating isn't coming on no rear screen heater fan not coming on any ideas please

hi,no heating water level ok its been temperamental over the last week or so working then not coming on at all blowin...

When starting the car, sometimes the auto light and the alarm light is on, when this happens the car won't start. The c...

esp and abs warning light coming on how easy is it to change sensors

The Lexia 3 Diag could not communicate with the gear ECU. During Diag, I always get the massage: "ECU not recognized" ...