Reversing Light Colour Wires
2009 Peugeot 308
Car: Peugeot 308
Year: 2009
Year: 2009
Categories:
Electrics, ECU, Warnings & Lights
I am trying to wire up parking sensors to my 308.
There is a mult block connected to the rear LHL with a number of different colour wires.I have connect the red positive wire from the sensors to red on back of block and the black negative from sensors to yellow with green stripe on block, but they do not work.
I cannot connect right up to the reversing light as it is powered from the circuit board.
Can you help. Thanks.
There is a mult block connected to the rear LHL with a number of different colour wires.I have connect the red positive wire from the sensors to red on back of block and the black negative from sensors to yellow with green stripe on block, but they do not work.
I cannot connect right up to the reversing light as it is powered from the circuit board.
Can you help. Thanks.
Problem added: Nov 15, 2017 (6 years ago)
Peugeot don't really use colour for wire identification,
There little number printed along the wires,
The reverse lamp wire number is MC265 and 2201,
Or you could just go to the reverse lamp gearbox.
There little number printed along the wires,
The reverse lamp wire number is MC265 and 2201,
Or you could just go to the reverse lamp gearbox.
Answered Nov 15, 2017 (6 years ago)
all you need is a test lamp...remove connector place in reverse with the ignition on and just touch each terminal till the test light illuminates..there is the supply for reverse light connect to that and a good earth and job done
Answered Nov 17, 2017 (6 years ago)
This problem is archived
If you're having a similar problem please click below to re-post this problem, you can then customise it to suit your situation.
Helpful & Related Pages on AutoInsider
Parts referenced on this page
Recalls (31)
View 31 Peugeot 308 RecallsMore problems with the 2009 model year Peugeot 308
We have 33 problems and solutions in our database for this model year of the car.
View all Peugeot 308 Problems