2003 Peugeot 307 stalling/ low revs
Year: 2003
Variant: s
Categories:
Running Rough, Starting & Power Loss
I have a pug 307s petrol 57,000 on clock just been serviced but the last couple of days its been stalling under reasonable braking and unable to hold revs ,when braking revs hit rock bottom causing car to stall any ideas would be appreciated x
Posted: Feb 5, 2011 (13 years ago)
have you checked the vacuum pipes on the inlet manifold and the brake servo vacuum pipe are not damaged or loose,does the car run/idle ok when stationary?if ems light on are any fault codes present?check idle control valve is`nt clogged up
Posted Feb 5, 2011 (13 years ago)
Thanx will check but the car does idles at just under 1000 when car on drive x
Posted Feb 7, 2011 (13 years ago)
Thanx will check but the car does idles at just under 1000 when car on drive x
Posted Feb 7, 2011 (13 years ago)
Thanx will check but the car does idles at just under 1000 when car on drive and no lights present x
Posted Feb 7, 2011 (13 years ago)
hello, did you manage to find out what was wraong with the peugeot 307 just im having the same problems. thanks.
Posted Jun 6, 2011 (12 years ago)
Have you had a look at this similar problem:
This message was auto-generated based on a user suggestion.
This message was auto-generated based on a user suggestion.
Posted Aug 16, 2011 (12 years ago)
it may be the speedo sensor, I had a similar problem with my car.
When I reduced my speed the car would cut out at every corner I turned, traffic light & junction. The revs would go to zero in an instant causing the car to cut out.
I had various things fitted before it was discovered it was the speedo sensor. What had happened is that the dial on the dash was working fine, but the cars brain would not register the cars speed causing the car to cut out.
Good luck and I hope this helps as it did with mine.
When I reduced my speed the car would cut out at every corner I turned, traffic light & junction. The revs would go to zero in an instant causing the car to cut out.
I had various things fitted before it was discovered it was the speedo sensor. What had happened is that the dial on the dash was working fine, but the cars brain would not register the cars speed causing the car to cut out.
Good luck and I hope this helps as it did with mine.
Posted Aug 16, 2011 (12 years ago)
This problem is archived
If you're having a similar problem please click below to re-post this problem, you can then customise it to suit your situation.
Join the community
Got a question? Can you answer other questions here? If so please...
More problems with the 2003 model year Peugeot 307
We have 125 problems and solutions in our database for this model year of the car.
View all Peugeot 307 Problems
307 Recalls (24)
Parts mentioned