How do I re-fix a loose/hanging-down, horizontal cover underneath front of car attached just behind front bumper/valance?
2003 Peugeot 307 S 1.6

1 points

Problem added: Apr 25, 2015 (6 years ago)
The front edge of this cover is fixed by two screws to the back/bottom edge of the front bumper/valance, but there are two attached, plastic clips integral to the back edge of this cover which have become detached from slots above in car bottom panel and won't re-fix, causing this cover to hang-down and scrap along the ground. There may also be two screw fixings missing, equally spaced along the centre of this cover, but haven't been able to get fully underneath car to verify.
Car: Peugeot 307
Variant: S 1.6
Model Year: 2003
Category: Running Rough, Starting & Power Loss
Replies and Fixes
1,786 points

Apr 28, 2015 (6 years ago)
There should be three push fit clips to hold it in place.These are prown to falling out .Some times an m8 small bolt will fit in place.If not a quick temp fix would be a couple of cable ties.

This problem is archived

If you're having a similar problem please click below to re-post this problem, you can then customise it to suit your situation.

What to do next?

Fix the problem yourself...

If you need parts to do the job head over to Euro Car Parts to find the parts you need.

  • Free UK Delivery
  • 365 Day Returns
  • Free Click and Collect
or Find a Local Mechanic

Use our AutoInsider Find A Specialist search, find garages and mobile mechanics near you.

Simply enter your postcode, select the required specialist areas and view your results.

Helpful & Related Pages on AutoInsider
Generated by AutoInsider AIBot
AutoInsider AI Robot picture
Having a problem with your Peugeot 307?

Tell us about your 307 problem

On Social Media