1999 Peugeot 406 heating and ventilation system dead

Car: Peugeot 406
Year: 1999
Variant: 1998 cc
The Whole system Is Down Even The Unit On The Dashboard
Posted: Jan 10, 2014 (10 years ago)
Depends on what you mean by " down" ? If you mean the heater motor is not operating , check fuses .
Posted Jan 10, 2014 (10 years ago)
This might help you also ,

" hi there
I have seen this fault many times a most times it is the ignition switch,to test this remove the fuse box cover underneath the steering wheel. you will see the fuse box in front of you ,the large black wire going into the front lower corner ( nearest the steering colum )of the fuse board should be live with the ignition switched on also the 40 amp fuse next to it should also be live. if not then the ignition switch is faulty
if there is a live at the wire and the 40amp fuse the the fault is with the fan speed control unit.this can be found in the n/s foot well on the heater box right next the front of the center console side trim ,this unit will have 2 connectors next to each other both of them are green ,one has 2 wires red live and black earth the other has 4 wires it is held in by 1 8mm headed bolt.

hope this is of some help to you

madmark
peugeot tech "
Posted Jan 10, 2014 (10 years ago)

This problem is archived

If you're having a similar problem please click below to re-post this problem, you can then customise it to suit your situation.

Join the community
Got a question? Can you answer other questions here? If so please...
More problems with the 1999 model year Peugeot 406

We have 67 problems and solutions in our database for this model year of the car.

View all Peugeot 406 Problems