Replies and fixes
what diagnostic tool are you using? early td4s suffer from fuel rail harness wiring problems new harness available from landrover for incorrect readings on fuel rail 1.5 bar car would not run on idle exspect to see 230 bar and when driving 680 to 1450 bar, also check injectors for excessive flow
hi forgot to mention when i pull the plug off the low pressure sensor it runs fine for a while then cuts out and i have to restart it and it runs again for a while
Have you tried replacing the fuel filter this could be causing a restriction.
yes that was the first thing i done
This problem is archived
If you're having a similar problem please click below to re-post this problem, you can then customise it to suit your situation.