Engine Revs too high

1996 Ford Fiesta 1.3 LX manual
Car: Ford Fiesta
Year: 1996
Variant: 1.3 LX manual
Categories: Running Rough, Starting & Power Loss
whilst Driving the car over revs whilst changing gears,and while you let the car roll out of gear the car continues to rev at around 4000 revs until you make the car come to a complete stop then the Revs come down put still sticks at 1500 to 2000 revs per sec.
and usally it only ticks over at 1000 revs when warm.
Ive checked the throttle cable and its fine.
so what is the problem that could be causing
this.
any advice welcome thanks
Problem added: May 13, 2009 (14 years ago)
idle speed control valve or throttle position sensor
Answered May 13, 2009 (14 years ago)
THERE IS A FORD TECHNICAL NOTE RELEASED FOR THIS. THE PARTS DO NOT COST A LOT, YOU NEED A TPS (THROTLE POSSITION SENSOR)AND MODIFIED WIRING PLUG. EASEY TO FIT IN UNDER A HOUR CAN FAX YOU PART NUMBERS OR SEND YOU THE PARTS.

HOPE THIS HELPS WWW.ANDREWSEAGUST.CO.UK
Answered May 13, 2009 (14 years ago)
I forgot to mention that when you free wheel the car out of gear as the car speeds up in free roll,
so does the exelerater is that down to the above sensors in question.
thanks
Answered May 14, 2009 (14 years ago)

This problem is archived

If you're having a similar problem please click below to re-post this problem, you can then customise it to suit your situation.

Helpful & Related Pages on AutoInsider

More problems with the 1996 model year Ford Fiesta

We have 39 problems and solutions in our database for this model year of the car.

View all Ford Fiesta Problems