2000 BMW 3 Series wont start
Year: 2000
Variant: 316i conpact
Categories:
Running Rough, Starting & Power Loss
had aa out towed me home looked at car for over an hour, said crank shaft sensor was the problem, put a new one on but still will not start, any ideas. thank you.m lane
Posted: Feb 25, 2008 (16 years ago)
I take it the AA guy checked all the usual, fuses etc, if so if you have no spark or fuel this symptomatic of a crank sensor but it needs checking on an oscilloscope to make sure it is a clean signal if there is any at all, if there is a signal then it needs to be checked back to the ecu
Posted Feb 25, 2008 (16 years ago)
Common problem on the 4 cylinder models,gives the appearance of a misfireing crank sensor but is in fact the crank damper, have come across a few,you will find that the outer section with the timing sensor pickups on has come away from the rubber holding it to the center,try holding on to the outer ring and wiggling it you should find it moves on the rubber hence putting timing out giving the appearance of a faulty crank sensor
Hope this helps
Hope this helps
Posted Mar 20, 2008 (16 years ago)
This problem is archived
If you're having a similar problem please click below to re-post this problem, you can then customise it to suit your situation.
Join the community
Got a question? Can you answer other questions here? If so please...
More problems with the 2000 model year BMW 3 Series
We have 33 problems and solutions in our database for this model year of the car.
View all BMW 3 Series Problems
3 Series Recalls (96)