Clutch Master Cylinder

i have a new clutch and clutch plate system fitted and clutch slave cylinder and clutch master cylinder fitted

Will.not go into gear then when left for approx 1 hour works again fine for a while

The drove well and all of a sudden the clutch went loose and the car can't drive now as it can't shift gears. So I'm unable to start the car though it does switch on

i am finding it harder to change gear

I've got a 2016 i10 with 50k on the clock just recently I have been struggling to find 1st & 2nd also reverse sometimes grinds when selecting any one else had this problem

Clutch pedal on the floor and won’t return . Can’t select any gears at all . The clutch doesn’t work

It's intermittent as don't drive many miles Used foot to lift back on position checked for return spring issue not it.Then checked fluid reservoir it was down below line Not going to drive until get ...

Car won't go in gear, and if turn it off and put in gear. And try to start it judders forward

Pedal suddenly no pressure, can't change gear. Then corrects itself, then same thing happens again.

When changing down gears, the car will not go into any gear, so effectively car is in no gear when driving. If stop the car, take foot of clutch then restart, it goes into gear no problem. Intermitte...