AutoInsider Logo

Peugeot 207 clutch

2008 Peugeot 207 Problem

The Problem:

it seems as if the clutch master/slave cylinder seals have gone. when you depress the pedal the clutch disengages but then slowly re engages the pedal remaining down. I was going to try bleeding the system and can see a bleed nipple but no fluid resvoir or any way of entering fluid into the system. Is this a sealed system or does it need specialist equipment to refill it. Any advice will be much appreciated.Thanks.

CarPeugeot 207 1.6cc

More Peugeot and 207 problems

From Original Poster

daveingram | Driver | Since: Apr 2011 | Posts: 0 | Fixes: 1 | View Garage
Suggested Solution

it seams i was a bit hastey. contacted peugeot and they said the master cylinder was supplied from the brake fluid resevoir.After much crawling around under car i eventually found the fluid supply line from the brake resevoir. tried bleeding system but problem persists.So i think its time for some skined knucles attemping to replace master cylinder.

Posted on Monday 18th of April 2011
Don't understand this? Ask a question

Solution 1

whittingehame | Legend | Since: Oct 2009 | Posts: 444 | Fixes: 9562 | View Garage
Suggested Solution

A lot of cars nowadays use the twin circuit master cyls reservoirs which feed brake / clutch and this can catch people out .

Posted on Tuesday 19th of April 2011
Don't understand this? Ask a question


Joe12345678 | Driver | Since: Jan 2013 | Posts: 0 | Fixes: 0 | View Garage
Suggested Solution

Car is a automatic.when reversing and stopping pedal is soft and goes to the floor.but is fine going forward.peurgeot 207 .help.

Posted on Sunday 27th of January 2013
Know the answer to this? Post a solution

Ask a Question Post a Solution

Ads by Google

More from Auto Insider

Twitter Icon Facebook Icon Google G+ Icon

Car Problems

Can you use a spanner?
Run an Auto Business?