AutoInsider Logo

Ford Focus Central Locking doesnt work!!?

2000 Ford Focus Problem

The Problem:

My Focus' central locking doesnt work, the remote doesnt do anything, but when inside the car if you lock one door, only that door locks, same with the boot, boot release doesnt work... everything is ok using the key, but electronically.. naff all.

Anyone got any ideas, dont want to have to go to the expense of going to a main dealer :(

Ref#1308
CarFord Focus 1.8 tddi
Year2000
OwnerDoug
Posted27/10/2008


More Ford and Focus problems


Solution 1

mastertech | Driver | Since: Oct 2008 Posts: 0 | Fixes: 221 | View Profile/Car
Suggested Solution

either fuse 23 on the back of the fuse box under the glove box ps fuse box has 2 sides/ or a drivers side locking motor / or key fob try replacing battery turn key in ignition on off fast till it bleeps then hold lock button.


Posted on Tuesday 28th of October 2008
Don't understand this? Ask a question

From Original Poster

Doug | Driver | Since: Oct 2008 Posts: 0 | Fixes: 12 | View Profile/Car
Suggested Solution

Right, I found the fuse replaced it it blew again... put another one in "pop" it blew again straight away. How would I go about working out which lock is the culprit? (is it just a matter of replacing a solenoid!?)


Posted on Wednesday 29th of October 2008
Don't understand this? Ask a question

From Original Poster

Doug | Driver | Since: Oct 2008 Posts: 0 | Fixes: 12 | View Profile/Car
Suggested Solution

Right, I found the fuse replaced it it blew again... put another one in "pop" it blew again straight away. How would I go about working out which lock is the culprit? (is it just a matter of replacing a solenoid!?)


Posted on Wednesday 29th of October 2008
Don't understand this? Ask a question

From Original Poster

Doug | Driver | Since: Oct 2008 Posts: 0 | Fixes: 12 | View Profile/Car
Suggested Solution

Right, I found the fuse replaced it it blew again... put another one in "pop" it blew again straight away. How would I go about working out which lock is the culprit? (is it just a matter of replacing a solenoid!?)


Posted on Wednesday 29th of October 2008
Don't understand this? Ask a question

Solution 2

mastertech | Driver | Since: Oct 2008 Posts: 0 | Fixes: 221 | View Profile/Car
Suggested Solution

right inside the door shuts their is the wiring harness dissconnet each 1 in turn and see which 1 doest blow the fuse when opperated


Posted on Wednesday 29th of October 2008
Don't understand this? Ask a question

From Original Poster

Doug | Driver | Since: Oct 2008 Posts: 0 | Fixes: 12 | View Profile/Car
Suggested Solution

ok right, do i need to start taking panels off or is it literally open the door and unclip? I have notice the passenger door lock doesnt work with key or fob or anything, the drivers door is fine with key. could this be a sign its the passenger door... or will i be going through 5 fuses potentially? Also if its this one, can I just leave it disconnected and the others and boot hatch will work as should?


Posted on Thursday 30th of October 2008
Don't understand this? Ask a question

From Original Poster

Doug | Driver | Since: Oct 2008 Posts: 0 | Fixes: 12 | View Profile/Car
Suggested Solution

Smack that badboy, sorted it out. just unplugged them all and kept plugging them in till the fuse blew.. the culprit.. a bad rear passenger drivers side door. Unplugged it, left it unplugged, locked it manually and seeming I never really use it, its all good.. the replacement is nothing urgent. The doors I use and my boot release works all good. :)


Posted on Friday 31st of October 2008
Don't understand this? Ask a question


Ask a Question Post a Solution





Ads by Google


Twitter Icon

Features

Car Problems