Peugeot 206 ignition barrel
2001 Peugeot 206 Problem
|AutoInsider Ref#: 11463|
Use this number to refer to this problem
|Car||Peugeot 206 1.4 manual|
More Peugeot and 206 problems
The problem i have is the ignition key will go into the barrel ok and starts the car but when i try to turn off or get the key out it is solid, this only happens every now and then, when it jams i have to wiggle the key until it comes out.Can i get a second hand barrel with key and immobiliser shroud that match and just plug into the loom or has the car got to be re-programed.
Ads by Google
|Since: Jun 2011|
|Posts: 13 | Fixes: 268|
Special tools needed:an hb pencil,a pencil sharpener and some medium grit sand paper.
Now rub the pencil lead on the grit,collecting the black dust,do it a lot,hence the sharpener.
now once you have a lot,you can't make too much,fold a piece of paper/card so you can pour the dust into the igniton barrel.
Pencil lead isn't lead,it's graphite and it's the best lubricant for ignition barrels,you just can't put too much in,some on the key as well.
now work the key in and out and back and forwards.
You will be amazed.
Or you can do as I do and buy a bottle of graphite powder,mines made by C/K.
I have never had to change an ignition barrel,or any car lock,amazing stuff!
Posted on Friday 6th of January 2012
Don't understand this?
Post a further question on this thread using this form Post a further question
Please note that the comments made here and the suggested solutions are the opinions of the posting user and should not be taken as professional advice. If in any doubt please seek professional advice from your local specialist. Find mechanics in your area using our Auto Local Directory.